Liugong Machinery

CLG414

Find a LiuGong product

  • Specifications
  • Features & Benefits
Engine   DCEC 6BTAA5.9-C160
Rated Power (kW) 118 (160)@2200
Blade Width mm(inches) 3660(144)
Maximum Speed km/h (mph) 41 (25.5)
Draw Bar Pull (kN) 65
Operating Weight kg(Lb) 12800(28219)
ENGINE  
Tier   II
Make   Dongfeng Cummins
Gross Power kW(Hp)@rpm 118 (160)@2200
Net Power kW(Hp)@rpm 109(148)@2200
Peak Torque   690N.m/1300rpm
Torque Rise %   34%
Number of Cylinders   6
Aspiration   turbo air-to-air aftercooled
TRANSMISSION  
Transmission Type   power shift
Transmission Configuration   6f/3r
Torque Converter   three-member single turbine
Maximum Travel Speed, fwd (km/h) 41
Maximum Travel Speed, rev (km/h) 29
Number of Speeds, fwd   6
Number of Speeds, rev   3
AXLES  
Front Axle Make   LiuGong Weld axle
Rear Axle Make   Meritor
Differential Type   NO-SPIN limited slip standard
Final Drive Type   chain drive
Axle Oscillation   ±15º
Front Axle Type   all welded steel frame
Front Axle, Wheel Lean Angle   ±17º
STEERING  
Steering Configuration   oad sensor steering gear
Steering Relief Pressure (Mpa) 17
Minimum Turning Radius (inches) 7200(283)
Steering Angle   ±45º
Frame Articulation Angle   ±20º
BRAKES  
Service Brake Type   (Dry) shoe
Service Brake Location   rear axle only
Service Brake Actuation   hydraumatic
TIRES  
Tire Size   13.00-24
HYDRAULIC SYSTEM  
Main Pump Type   gear
Main Relief Pressure (Mpa) 18
Pilot Pump Flow L(Gal)/min 119(31)
WORKING CAPACITIES  
Maximum Draw Pull (kN) 65
Cutting Pressure kg(Lb) 5500(12125)
TANDEM DRIVE PERFORMANCE  
Height mm(inches) 580(23)
Width mm(inches) 210(8)
Thickness, inner wall / outer wall mm(inches) 20/20(0.8/(0.8)
Center Distance mm(inches) 1540(61)
Oscillating Angle   ±15º
MOLDBOARD PERFORMANCE  
Bank Cut Angle   40~70
Moldboard Lift Above Ground mm(inches) 460(18)
Moldboard Side Shift, right / left mm(inches) 650/520(26/20)
Maximum Sloping Angle   90º
Cutting Depth mm(inches) 600(24)
Circle Rotation   360º
Circle Diameter mm(inches) 1265(50)
Circle Thickness mm(inches) 120(5)
DIMENSIONS  
Wheelbase mm(inches) 5900(232)
Overall Length mm(inches) 8340(328)
Overall Height with Cab   3370(133)
Overall Width mm(inches) 2465(97)
Clearance under Front Axle mm(inches) 570(22)
Moldboard Standard Length mm(inches) 3660(144)
Moldboard Standard Thickness mm(inches) 19(0.7)
Moldboard Standard Height mm(inches) 610(24)
OPERATING WEIGHTS  
Operating Weight kg(Lb) 12800(28219)
On Front Wheels kg(Lb) 3400(7496)
On Rear Wheels kg(Lb) 9400(20723)
SERVICE CAPACITIES  
Fuel Tank L(Gal) 250(66)
Engine Oil L(Gal) 17(4)
Cooling System L(Gal) 40(11)
Hydraulic Reservoir L(Gal) 100(26)
Transmission And Torque Converter L(Gal) 45(12)
Tandems, Each L(Gal) 23(6)
WWW.LIUGONG.COM  ©2009-2011 Liugong Machinery Co., Ltd.All Rights Reserved
Dealer Login | Legal Notice | Contact Us | Sitemap